Xantrex-technology MS2000 Manual do Utilizador descarregar pdf (Página 34)

Operation

2–4 975-0125-02-01

On Start Up

When the MS2000 is powered up or comes out of a reset state, all of the front

panel lights illuminate and remain on for a minimum of five seconds. After five

seconds, the lights remain illuminated until the front panel has status information

for all the lights.

The MS2000 is disabled every time the unit is powered up. The inverter must then

be enabled. When a function is disabled, it is not allowed to occur and if it is

occurring, it is terminated. Regardless of other conditions, the function will not be

activated. For example, even if AC power is present, if the charger is disabled, the

unit will not charge.

When a function is enabled, it is allowed to occur but other conditions may have

to be met before the function is activated or turned on. For example, the charger

function on the MS2000 may be enabled, but it will not charge unless qualified

AC power is present.

Power On Reset

To perform a power on reset, hold the reset button on the front panel for about 5

seconds. All front panel lights will illuminate to indicate that the unit has reset.

6 Up arrow button

• Scrolls up one line of text.

• Increases a selected value.

7 Down arrow button

• Scrolls down one line of text.

• Decreases a selected value.

8 Exit button

• Cancels selection of a menu item.

• Returns you to the previous screen.

9 System button:

• Toggles all Xanbus-enabled devices on the system between

Operate mode and Power Save mode. See “System Modes”

on page 2–6.

10 Screen displays menus, settings, and system information.

Table 2-1

System Control Panel Features and Buttons

Feature Description

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 125 126

Sem comentários

Xantrex-technology MS2000 Manual do Utilizador Página 34